1501-1506 Single & Dual 3 Ply, Low Area & Liner
Information at a Glance
Series
1500 Laminated Low Area Bellows Expansion Joints
Material
Steel
Size
2-14 in. / 50-350 mm
Pressure
≤150 & 300 PSI / 10 & 20 Bar
Motion
6+ in. / 75+ mm
Canadian Registration
This product is registered throughout Canada under
CRN 0D9278.59870YTNADD3
Other Products
Product Description
Series 1500 Laminated Bellows Expansion Joints are designed for installations where the principal movement is axial. Standard designs are 2” through 14” NPS with 2” or 3”axial compression. Service conditions are 150 PSIG or 300 PSIG to 500°F.
Technology & Advantages
The bellows element is integrated into the design to provide the minimum effective area and resulting pressure thrust. The laminated construction results in the optimum cycle life and lowest possible spring constant.
A stainless steel flow liner is standard with negligible reduction of flow area and resulting flow interference. Standard Series 1500 Laminated Bellows Expansion Joints are available from stock, and they have a Five year full replacement warranty.
Common Applications
Series 1500 Laminated Bellows Expansion Joints are designed for installations where the principal movement is axial. Standard designs are 2” through 14” NPS with 2” or 3”axial compression. Service conditions are 150 PSIG or 300 PSIG to 500°F.
The bellows element is integrated into the design to provide the minimum effective area and resulting pressure thrust. The laminated construction results in the optimum cycle life and lowest possible spring constant. A stainless steel flow liner is standard with negligible reduction of flow area and resulting flow interference. Standard Series 1500 Laminated Bellows Expansion Joints are available from stock, and they have a Five year full replacement warranty.
Series 8500 Expansion Compensators are comparable products that are available in smaller diameters. Steel pipe and copper tube configurations available.
Series 3500 Externally Pressurized Expansion Joints are comparable products with greater travel. Standard designs are available through 24”.
Series 9500 Alignment Guides are designed to maintain the alignment of the pipe adjacent to expansion joints, and as intermediate guides throughout the pipe run.
Design Data
Ordering Information
Hyspan products are available from Sales Representatives and Distributors, or they can be purchased direct from the factory. The minimum factory order for open account customers, COD shipments, or bank card sales is $100.00 (USD). All major credit or debit cards are accepted. The minimum order for new account applicants is $100.00. Our Confidential Credit Application can be downloaded and forwarded to Hyspan for processing. All orders are subject to the following Terms and Conditions, and the above warranty applies to all material. Please read these documents.
Confidential Credit Application (13.9 KB), can be completed on line.
