Type CSP Solar Style II Packed Ball Joints, 2″ to 4″ NPS

Type CSP Solar Style II Packed Ball Joints, 2″ to 4″ NPS

Information at a Glance

Series

6600 Hyspan Barco Ball Joints

Material

Steel

Size

2-240 in. / 50-6000 mm

Pressure

≤150 & 300 PSI / 10 & 20 Bar

Motion

16+ in. / 400+ mm

Series

3500 Ext Pres Laminated

Canadian Registration

 

This product is registered throughout Canada under
CRN 0D9278.59870YTNADD3

Other Products

Product Description

Hyspan Barco Type CSP ball joints are commonly used to connect the heat transfer fluid piping of parabolic mirror solar collectors to the main header, and in the crossover piping between adjacent rows of the mirrors. These connections absorb the thermal expansion of the collector tube that extends the length of the mirrors, and allow the mirrors to rotate from the stowed position (facing down) and then rotate to track the sun during operation.

Header Linkage

The photograph of the Header Linkage shows the insulated piping with three ball joints located at the end of each mirror. The ball joints rotate as the linkage is actuated when the mirror rotates, and angulate (flex) to absorb the thermal expansion of the collector tube as shown by this video.

Crossover Piping

The photograph of the Crossover Piping shows the insulated loop connecting two mirrors. In this photograph both mirrors are facing downward. There are two ball joints incorporated into a dual assembly at the center and a single ball joints on each side. Although it is not shown in this photograph the design allows for one mirror to be facing downward with the adjacent mirror focused on the sun.

Technology & Advantages

The ball joints installed in this piping are shown in the adjacent photographs of the single ball joint and the dual ball joint. The center section of the dual assembly is machined from one piece to eliminate welding. The maximum design conditions for the ball joints illustrated were 30 Bar (435 psig) and 393ºC (740ºF) using Dowtherm A®. They rotate 215º and flex +/- 7º.

Dual Ball Joint
Single Ball Joint

In order to validate the design, Hyspan performed a life cycle test simulating the 30 year design life of the system. This involved operating a test apparatus for 11,095 cycles (30.3 years). Throughout this test the ball joint remained leak tight and the flex torque and rotational torque remained within specifications. A summary (Summary Test Report, Ball Joint Life Cycle) of the testing is available in the Technical Assistance section.

Design Features

The Hyspan Barco Ball Joints incorporate design features that are not available in comparable products.

• The design includes Inner and Outer Seals which rigidly position the ball, and the outer seal reacts the pressure thrust.

• The materials of the seals can be varied to be best suited to the design requirements.

• Additional graphite packing can be injected through the Injection Ports after the joints are in service without removing the joints. The procedure for injecting packing is described in the Installation and Maintenance Procedures for Type N Style II, ASME Class and OW1500 ball joints.

• All Hyspan Barco Ball Joints can be completely disassembled for inspection or maintenance. Sizes through 2″ NPS have threaded retainers. The 2-1/2″ NPS can be threaded or flanged.

• The removable retainers have the added benefit of allowing precision adjustment of the internal resistance (flex torque) of the ball joint.

Ordering Information

Hyspan products are available from Sales Representatives and Distributors, or they can be purchased direct from the factory. The minimum factory order for open account customers, COD shipments, or bank card sales is $100.00 (USD). All major credit or debit cards are accepted. The minimum order for new account applicants is $100.00. Our Confidential Credit Application can be downloaded and forwarded to Hyspan for processing. All orders are subject to the following Terms and Conditions, and the above warranty applies to all material. Please read these documents.

Terms and Conditions

Confidential Credit Application (13.9 KB), can be completed on line.

Downloads

Coming Soon…
Catalog
Approval Submittals
Spec Sheet
Installation Instructions
Warranty